NAT and redirection to a branche site

Here to help

NAT and redirection to a branche site

Hello all,


I am installing Meraki MX85 on 5 sites , a hub site and 4 spokes .


On one spoke I have a website on a LAN server , to get to this website from the internet , the request is first sent to the hub where there's a fortinet FW (That will be replaced by an MX85) , this FW send the request to the spoke site via a redirecting rule .



My client want to keep the same configuration : 


to get to the website hosted on a lan server of the spoke , requests should be sent to the HUB ( MX 85 ) and then from the hub the request is sent via SD-WAN to the spoke.


I tried to add a Nat rule but it's not working as the subnet of that server isn't declared on the hub .


Does anyone have an idea of how I can route traffic sent to this spoke site via SD-WAN  please?



Thanks .

1 Reply 1
Kind of a big deal
Kind of a big deal

As far as I remember this configuration is not possible unless you have a point to point between the two sites.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.