cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

NAT VLAN to VLAN on MX

Highlighted
New here

NAT VLAN to VLAN on MX

We have 4 Interfaces (VLANs) configured on the MX.
1. WAN
2. Internal
3. DMZ1
4. DMZ2

Now, we want to do an NAT from DMZ1 to DMZ2. Is this possible?

 

Thanks

3 REPLIES 3
Highlighted
Meraki Employee

Re: NAT VLAN to VLAN on MX

I am assuming the DMZ 1 and DMZ 2 are connected to the LAN interfaces, in this case, you won't be able to do NAT. If the DMZ1 or DMZ2 is connected to the WAN interface then you can perform 1:1 NAT or 1:Many NAT, but it has to be performed from LAN to WAN interface.

https://documentation.meraki.com/MX-Z/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_M...

 

Highlighted
Conversationalist

Re: NAT VLAN to VLAN on MX

The ability to do NAT/PAT between VLANs on the MX and/or MS would be VERY useful.

Highlighted
Meraki Employee

Re: NAT VLAN to VLAN on MX

I would recommend to use make a wish from the dashboard so our product team will have this feedback.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.