Meraki SDWAN with DR site

[AYEN]

Hi,

    I have a deployment of Cisco Meraki SDWAN but for this use case they want to have a backup site of SDWAN once the main site are down.       

           Main Site MX  Hub  ------------- Spoke Branch Site MX 

                                                                 |

           DR Site Backup Hub ------------

   Is it feasible to configure, the Active is Main and the Passive is DR site. Please any recommendation guys.

  Thank you

[cmr]

You can order the hubs so that the main site is at the top of the list and the DR site is second on the list.  This was all connections should go to the main site unless it has a problem.

[AYEN]

Hi @cmr ,

     How about the default route, do i need to configure both hub as a default route or not?

[alemabrahao]

No, it is not necessary, just set the HUB priority order and it will work fine.

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

[AYEN]

Hi @alemabrahao ,

      I already search the possible document for these use case, but I confuse regarding priority hub on Meraki Auto VPN. How do I setup the priority? Do I set last Hub datacenter for descending order.

[Tony-Sydney-AU · Accepted solution]

Hi @AYEN ,

You just click and hold the cross-arrows, moving up the Hub you want to have the best priority.

The number is the priority ; the hub on the top has the best and the others would be back up / fail over.