Meraki MX250

alsterb
New here

Meraki MX250

Is there a way to prioritize voice traffic above all other traffic AND have it always use the WAN circuit with the lowest latency (dynamically)?

1 Reply 1
Ryan_Miles
Meraki Employee
Meraki Employee

You can use flow preferences to set voice traffic to a preferred WAN uplink https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferen...

 

If the voice traffic is going over VPN you can use SD-WAN uplink policies which can use a configurable SLA (latency, jitter, loss) to send traffic on a preferred WAN uplink https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping#SD-WAN_p...

 

In MX16 beta you can now also use SD-WAN uplink policies for internet bound traffic https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/... 

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels