I just want to validate this configuration will work on the MX (latest firmware).
We have a need to get a second /29 public ip block from the same (Primary) ISP. The MX will have a public IP on its WAN interface from the first /29 block. The 2nd /29 block from the same ISP will be used for NAT forwarding. Is this a valid configuration that will work with the MX (I know it works with other FW's), this second /29 will be not be contiguous with the first /29 block.
I believe this configuration will work but wanted to ask the community if there are any gotcha's.
Thanks
Sarvjit