Meraki MX Firewall 4G Failover Problem!!

[network34]

Hi there,

When primary line is down and 4G failover trigger, it was take 2 or 3 minute. Is there anything that can be done to make this process faster??

Thanks

[Brash]

It depends on the failure scenario. If the physical link on wan 1 goes down, failover should be immediate.

Is the physical link on wan 1 is still up, but the internet connection has gone down, it can take up to 300v seconds for connection monitoring to perform a failover.

Further info at below link

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Connection_Monitoring_for_WAN_Failo...

[network34]

Do you know can we decrease this time? (300 seconds)

[Brash]

No, this time cannot be decreased 

[PhilipDAth]

Are you talking about the time it takes AutoVPN to failover, or the time to failover, in general, to be able to access the Internet?