cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Meraki MX Client VPN idle timeout

SOLVED
PilarJimenez
New here

Meraki MX Client VPN idle timeout

Can a Meraki MX be configured with idle timeout to drop a client VPN tunnel after the idle timeout is exceeded?

1 ACCEPTED SOLUTION

Accepted Solutions
UCcert
Kind of a big deal

Re: Meraki MX Client VPN idle timeout

Hi @PilarJimenez , there is no timeout option. The session will only terminate once the user clicks disconnect 

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

3 REPLIES 3
UCcert
Kind of a big deal

Re: Meraki MX Client VPN idle timeout

Hi @PilarJimenez , there is no timeout option. The session will only terminate once the user clicks disconnect 

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

PilarJimenez
New here

Re: Meraki MX Client VPN idle timeout

Thank you!

JohnT
Getting noticed

Re: Meraki MX Client VPN idle timeout

If you deploy the client with PowerShell you can use the -IdleDisconnectSeconds parameter to set the idle timeout in the client connection settings.  You can also set this in the VPN network adapter settings on the Options tab.  Just set the timeout where it says "Idle time before hanging up.".  This only works on a PC.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.