Meraki L2 VPN to use centralized DHCP server in all sites.

[Ahmed_Fathy]

Dears

Thanks for your support to advise if I can use Meraki for L2 VPN or any workaround to be able to use same subnet and DHCP server in HQ to distribute IPs of same HQ subnet in remote offices too.

Note: it tried DHCP relay but it is only transfer different subnet and i am not sure about passthrough mode if it is the solution for this request.

[ww]

Would only be posible with a mr

" VPN: tunnel data to a concentrator

Meraki devices send traffic over a secure tunnel to an MX concentrator."

 "Ethernet over GRE: tunnel data to a concentrator

Meraki devices send layer 2 traffic over a tunnel to an EoGRE concentrator creating a transparent ethernet bridge. Clients receive DHCP leases from the LAN on the other end of the tunnel as in bridged mode"

What is the problem with using different subnets?

[Ahmed_Fathy]

Is that mean we can use for ex  MR33 in remote sites and MX-64 in HQ ?

and is it available to use Z3 instead of MR33?

[cmr]

@Ahmed_Fathy it has to be an MR, though you could perhaps use the wired ports on an MR36H if you need non-wireless at the remote site.