Meraki Firewall GUI Access

SOLVED
Grogu
New here

Meraki Firewall GUI Access

To access Meraki Firewall Device, you have to got to the meraki.com web site? Or can you bring up the Meraki GUI via Public WAN IP? If yes, what would be the port to use, ex. https://x.x.x.x:8080/meraki/ etc. Or does this need to be enabled via xxxx.meraki.com dashboard?  Appreciate the feedback.

1 ACCEPTED SOLUTION

Accepted Solutions
KarstenI
Head in the Cloud

Re: Meraki Firewall GUI Access

You are probably talking about the local status page. Access to it can be controlled from the dashboard:

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

Be aware that this status page is only for initial setup for the cloud connectivity and not to configure the whole device. That is only done on the dashboard.

View solution in original post

1 REPLY 1
KarstenI
Head in the Cloud

Re: Meraki Firewall GUI Access

You are probably talking about the local status page. Access to it can be controlled from the dashboard:

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

Be aware that this status page is only for initial setup for the cloud connectivity and not to configure the whole device. That is only done on the dashboard.

View solution in original post

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.