Meraki 450 warmspare port down

SopheakMang
Building a reputation

Meraki 450 warmspare port down

Dear Expert,

 

i have 2 Meraki MX 450 doing warmspare , working okay , but just yesterday , one port of the secondary MX450 is down

(WAN port SFP+) no change to the config.

 

 

As you can see , the upper device wan port is light , the down stream device is port down.

 

is this cuz of module ? or wire ?

cuz last time when i didn't plug the wire port also up. not sure abt this.

2 REPLIES 2
CptnCrnch
Kind of a big deal
Kind of a big deal

What's the color of the Power LED? Static orange? Otherwise it looks like it doesn't have cloud connectivity: https://documentation.meraki.com/MX/Installation_Guides/MX450_Installation_Guide#Ports_and_Status_In...

 

Also, what's the status of the machine on your Dashboard?

rhbirkelund
Kind of a big deal

I have seen before, that for some unknown reason, the SFP inserted to an MX, just crashed.
Pulling it out, and reinserting the SFP made it come up again. Not sure if that's the case.

Perhaps try that?
LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels