cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX87 Connection issues

SOLVED
Highlighted
Here to help

MX87 Connection issues

Hello everybody,

 

I have got a MX87 with 2 Uplinks. WAN 1 works fine and everything is ok. If I try to use WAN 2 as my primary uplink, the MX itself can connect to the network and ping google.at but it doesn´t provide any connectivity over its ports. 

Did anyone had the same issue before and can tell me what to do.

 

Thanks in Regards.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Here to help

Re: MX87 Connection issues

Hello form members, 

 

the solution for this problem was to swap primary MX with the secondary over Meraki Dashboard. I cannot relate any reason to the issue but after we did this everything worked fine. Seems like a bug.

View solution in original post

4 REPLIES 4
Highlighted
Kind of a big deal

Re: MX87 Connection issues

If you disconnect your WAN2 from the MX, connect it to your laptop, setup your static IP (if it has any) and test your connection to verify if its working at all or not. Sounds like that connection has issues nothing to do with the MX
Nolan Herring | nolanwifi.com
TwitterLinkedIn
Highlighted
Kind of a big deal

Re: MX87 Connection issues

Make sure you've got a software firewall enabled on your laptop before you run this test!

Highlighted
Kind of a big deal

Re: MX87 Connection issues

Is there an upsteam possibly NAT device from the MX on either uplinks?

 

Also to confirm is this MX67 or MX84?

Highlighted
Here to help

Re: MX87 Connection issues

Hello form members, 

 

the solution for this problem was to swap primary MX with the secondary over Meraki Dashboard. I cannot relate any reason to the issue but after we did this everything worked fine. Seems like a bug.

View solution in original post

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.