MX67 Clients

[MarcM1]

Hi,

I have just setup an MX67 as a spoke connected to a VPN hub, it's working but in the Network-Clients section, Client list is showing external Public IP addresses. I have 2 other spokes setup back to the VPN hub and they just display the internal clients. Is this a configuration issue or do I need to contact my ISP?

Thanks in advance.

[alemabrahao]

How is your DHCP scope configured?

Theoretically, no additional configuration is required.

[PhilipDAth]

>Client list is showing external Public IP addresses.

Have you got the internal circuit connected via any internal switch ports, either in an MX or an MS?

This is a common trick for connecting two MX to one Internet port.