MX64W - Port connections

Solved
ROK815
New here

MX64W - Port connections

MX64W - want to know if there is a way to find out what is connected to each port on the Meraki dashboard site?

 

port 1 - 192.168.0.1  (ip or mac address)

port 2 - empty

port 3 - 192.168.0.2 and 192.168.0.3

port 4 - empty

 

Thank you in advance.

1 Accepted Solution
MijanurRahman
Getting noticed

No, MX doesn't provides report like this. MS switches gives you visibility like that.

However, if you notice the 'Network-wide > Clients' page, you might find few relevant information. Usually I make my mind before I connect any switch on MX and add a 'note' on it. It helps me on troubleshooting.

View solution in original post

1 Reply 1
MijanurRahman
Getting noticed

No, MX doesn't provides report like this. MS switches gives you visibility like that.

However, if you notice the 'Network-wide > Clients' page, you might find few relevant information. Usually I make my mind before I connect any switch on MX and add a 'note' on it. It helps me on troubleshooting.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels