MX64 site-to-site VPN tunnel to Azure

[esheldon]

Has anyone been successful in setting this up?  I'm trying to setup a client's office to their Azure tenant so they can let users WFH, and then print to office printers/scanners as needed.  I'm trying to follow all the documentation, but nothing is working, so I just wanted to see if anyone's been successful in doing so, and maybe what firmware you're on?  I'm on the latest v14 as of today.

[Claes_Karlsson]

What settings do you have on Azure?

I believe that you may have different options of setups. 

I've read on some threads earlier that it only supports IKEv1 between meraki and Azure, some threads says it only supports policy-route based settings on Azure, while some says you can have route-based setting on Azure meanwhile you use azure-presets and delete md5 in the phase 2.

Check out these two links below

https://www.virtualizationhowto.com/2017/08/configure-meraki-to-azure-site-to-site-vpn/

https://community.meraki.com/t5/Security-SD-WAN/Azure-VPNs/td-p/3196

/CK

[SoCalRacer]

This is a good link to review that you got it all configure correctly.

https://www.ifm.net.nz/cookbooks/meraki-vpn-to-azure.html

[esheldon]

I had to get the firewall upgraded to the v15 beta, and then make a few modifications on my end.  Thanks for your help, all!