MX64 Status light query

cta102
Building a reputation

MX64 Status light query

Fairly trivial question except I have had a couple of customer queries, believing their MX64s have been powered off and the one I have at home is doing the same thing.

 

Has anything changed in the recent MX firmware regarding the behaviour of the front LED indicator?

 

The white (everything good) or flashing white (firmware updating) is running at a very reduced brightness and is incredibly hard to see.

 

During reboot and everything else, the LED indicator operates at the regular brightness level.

As it's an RGB LED which can reach full brightness while booting I would very much doubt it's a hardware issue

 

My MX65 runs happily on with a full intensity white status (and full intensity flash during the update process.)

3 Replies 3
jdsilva
Kind of a big deal

I've also noticed this on a few of my MX64's. I didn't really think much of it though. But you're right. It's very dim.

viking
Here to help

Same

 

20190729_121224.jpg

cta102
Building a reputation

Just glad that I'm not imagining things.

Guess I should log the issue then as it's aberrant behaviour (it didn't used to do that.)

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels