cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX64 HA Load Balancing

Comes here often

MX64 HA Load Balancing

Dear Sir,

 

If Two Meraki mx64 are in HA warm spare. And both the device WAN1 are connected to different ISP internet.

 

Is it possible to configure internet load balancing as well internet fail over between primary and spare WAN1.

 

Thanks and regards.

 

 

 

 

6 REPLIES 6
Kind of a big deal

Re: MX64 HA Load Balancing

No. Load balancing between MX's isn't supported. It's a warm spare failover system. More information here:

https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair

 

A better setup would be to have each MX connect to each ISP's router too.

Kind of a big deal

Re: MX64 HA Load Balancing

@BrechtSchamp has a point 

 


@BrechtSchamp wrote:

No. Load balancing between MX's isn't supported. It's a warm spare failover system. More information here:

https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair

 

A better setup would be to have each MX connect to each ISP's router too.


 

Re: MX64 HA Load Balancing

But, is possible to connect the MX-64 to two different ISP and manage the load balancing between those 2 connections in just one MX-64 ???? 

 

thanks for the answer.

Kind of a big deal

Re: MX64 HA Load Balancing


@richisaurio1982 wrote:

But, is possible to connect the MX-64 to two different ISP and manage the load balancing between those 2 connections in just one MX-64 ???? 

 

thanks for the answer.


Yes. Check this document:

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferen...

 

And this one to convert one of the LAN ports to a WAN port:

https://documentation.meraki.com/MX/Installation_Guides/MX64_Installation_Guide#Setting_up_secondary...)

Re: MX64 HA Load Balancing

thanks a lot for your answer. Just one more thing , where can i contact to a seller on my space area ?? wich partners do you have for suggest in Santa Cruz or Sucre - Bolivia.

 

Best Regards.

Kind of a big deal

Re: MX64 HA Load Balancing

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.