MX250 WAN port SFP module MA-SFP-1GB-LX10 compatibility

[Lukeli]

Hiya! First time writing here, but I've got a lot of experience with Meraki equipment and it's magic. I would appreciate if someone already tested the following and can help me out:

If you've got MX250, can you connect MA-SFP-1GB-LX10 SFP module on it's WAN port (my goal is to use 1Gbps single mode fiber here), does it work?

I see that on this page https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Small-Form_Factor_Plu... it says MX250 is compatible with the mentioned SFP, but when I go directly to the MX250 page https://meraki.cisco.com/product/security-sd-wan/large-branch-campus-concentrator/mx250/ I don't see the SFP module (MA-SFP-1GB-LX10)  in Accessories list.

Thanks!

[Brash · Accepted solution]

I would trust the SFP compat list over the MX family datasheet.

I've used an LX10 SFP in an MX75 WAN port without issue.

[Lukeli]

Alright, thanks, I see many people agree with this, so I'll try it out as well then.

Cheers,

Milos

[PhilipDAth]

+1 to @Brash .  I would also trust the SFP compatibility spreadsheet in preference to the MX250 data sheet.