Meraki

Community

MX - WAN configuration

Solved

Hi all,

I am migrating an MX from one organization to another (same client). Once migrated, I would like to configure the WAN with the same static public IP. My question is: since there is no DHCP on the provider's side, is it possible that the signal won't connect?

My fear is that i will lose my MX .

Is it then better to configure via dashboard the interface statically before connecting it to the network, or is it safer to go to the client's site and set the IP via the Local Page?Whats the best practice?

Thank you.

1 Accepted Solution

Yes, if you continue using the same ISP with the same IP, yes.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

9 Replies 9

Check it out.

https://documentation.meraki.com/General_Administration/Inventory_and_Devices/Moving_Devices_between...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

The safest thing is to leave the MX with the IP configured.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

OK, weird cause when i go to remove the network from the Appliance i expect the IP to be delete automatically

Not really, it keeps the IP settings static.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

The MX will only lose this configuration if you factory reset it.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

So you are saying that....when i remove the network from a MX and i claim it in the new organization, the connectivity should work fine without any othe configuration on the WAN Public interface?is that correct?

Yes, if you continue using the same ISP with the same IP, yes.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

You can trust me, I've done this many times. 😉

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

thanks for the reply but there is not sign of what i asked for.

Welcome to the Meraki Community!

To start contributing, simply with your Cisco account. If you don't yet have a Cisco account, you can .

Labels

3rd Party VPN 166
ACLs 100
Auto VPN 313
AWS 38
Azure 70
Client VPN 427
Firewall 702
Other 588