MX Templates

PavanP
Here to help

MX Templates

Hello Meraki Community,

 

Do we have an option to customize network address space after binding with template. We are not using vlans and using single vlan.

 

2 Replies 2
Ryan_Miles
Meraki Employee
Meraki Employee

With VLANs disabled it assumes the same LAN subnet for all MXs. You can only change it at the template level in that case.

 

If you need unique subnets per site then in the template enable VLANs and choose Subnetting : Unique. If you only need one VLAN that is fine.

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
PhilipDAth
Kind of a big deal
Kind of a big deal

If I understand what you are asking - yes, you can go into the network bound to the template and change the auto-assigned subnet to something else unique in the same supernet allocated to the template.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels