MX Management Port

Solved
networkninja_
Comes here often

MX Management Port

Is it possible to setup the MX250 management port with a static IP address and access it for out of band? Wondering if this can be setup so we can remotely access the status page of the MX incase we lose connection to the Meraki cloud.

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

You can't configure it in anyway.

 

You would have to use a management with two interfaces. One plugged into the MX management port that got its config via DHCP, and the other connecting to the out of band network.

View solution in original post

4 Replies 4
PhilipDAth
Kind of a big deal
Kind of a big deal

You can't configure it in anyway.

 

You would have to use a management with two interfaces. One plugged into the MX management port that got its config via DHCP, and the other connecting to the out of band network.

networkninja_
Comes here often

I'll give that a try, thanks!

GIdenJoe
Kind of a big deal
Kind of a big deal

It would be extremely handy to be able to configure it but it is not so 😉

networkninja_
Comes here often

Thank you!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels