MX LAN Link aggregation

Getting noticed

MX LAN Link aggregation

Can I aggregate LAN port 3 and 4 into a port channel on MX67 or any other MX for that matter ?

If not whats the best way to do LAN port redundancy on MX ?

1 Reply 1
Kind of a big deal
Kind of a big deal

No, port-channels are not configurable on MX devices.

The MX does however pass through STP packets so you can connect 2 cables to the same network.
One will be brought down (due to STP loop prevention) but can be used as a backup if the primary connection fails.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.