cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX 84 outbound IP

SOLVED
Conversationalist

MX 84 outbound IP

Hi,

i've a pool of public ip's.

i've set 1:many NAT a lot of services on a server, but, in outgoing the ip of the server is the default public ip;, is there a way to set, for a server, a different public ip?

thanks

best regards

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Getting noticed

Re: MX 84 outbound IP

This is not entirely true. 1:1 NAT outbound traffic will use IP set in 1:1 NAT.

https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Configuring_1%3A1_NAT

However in this situation you would be correct. OP would need to convert to 1:1 NAT.

View solution in original post

3 REPLIES 3
Kind of a big deal

Re: MX 84 outbound IP

Hi @Raffa76 . No, you cannot do source NAT on the MX like you are asking. You can use your pool for inbound connections, but you cannot use it for outbound. That will always use the interface IP of the MX.

Getting noticed

Re: MX 84 outbound IP

This is not entirely true. 1:1 NAT outbound traffic will use IP set in 1:1 NAT.

https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Configuring_1%3A1_NAT

However in this situation you would be correct. OP would need to convert to 1:1 NAT.

View solution in original post

Kind of a big deal

Re: MX 84 outbound IP

Hi @JasonCampbell. It will only use it in reply traffic. Any connections initiated from Inside will not use the 1:1 NAT IP.

 

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.