MX 84 Static Routing Issue

ludwigbery
Getting noticed

MX 84 Static Routing Issue

Hi,

 

would anyone be able to help me with my flat network?

im having issues below

SRS2.JPG

 

 

MX Subnet - 192.168.0.0/24

MX IP - 192.168.0.246

SRS1.JPG

 

 

 

6 REPLIES 6
nealgs
Building a reputation

what are you using for you next hop gateway for the 192.168.100.1 subnet?

PhilipDAth
Kind of a big deal

The next hop would need to be 192.168.0.x.

 

What device is providing a route to this remote subnet.?

ludwigbery
Getting noticed

@PhilipDAth @nealgs 

192.168.100.1 is my MPLS router

 

just to give you a more grasp of the issue. I'm replacing old Juniper of my client with Meraki. they do have 2 service provider with MPLS.

 

in Meraki I can directly input all the static routes needed to the 1st MPLS router which has 192.168.0.1 (also my next hop) no problem with this route

 

but with 192.168.100.1 I need to pass Juniper with 192.168.0.254 address, now on meraki the next hop is juniper instead of directly MPLS router

ww
Kind of a big deal
Kind of a big deal

then you need also 100.x subnet on meraki and trunk them both to the juniper. 

 

otherwise 0.1 is your only next hop

ludwigbery
Getting noticed

Hi @ww 

 

thanks! this is what im thinking, but, MX84 is configured with single LAN do I need to create VLAN's?

Yes, you do need to use VLANs to define multiple subnets in the MX.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels