MX 84 Site-to-site outbound firewall rules is Difficult to make Multiple Source IP(subnets)

[Kave]

MX 84 Outbound Firewall Difficult to make Multiple Source IP.( Multiple Subnets)

Need help to find any solution to make it easier? Meraki does not Allow you to make Site-to-site outbound firewall rules with 2 or more IP sources. 

[General-Zod]

Greetings,

You can specify multiple source IP's in the outbound VPN firewall policies. Looks like you're not entering the IP address correctly (from your screenshot). Each IP must be separated by a comma. See below:

[Kave]

Thank you General-Zod,
But I think my question was wrong, i need to make a bunch of the subnet in source IP.
somthing like 192.168.3.0/24,192.168.1.0/24,192.168.4.0/24.................

[General-Zod · Accepted solution]

I'm assuming you have tried to do this and it failed?

However I'm able to do this with no problems, see screenshot.

[Kave]

Thank you General-zod, before That I did not use space after the comma.