MX - 1 to 1 NAT private to private ip addresses?

[hmc25000]

Can you do 1 to 1 NAT private to private ip addresses on a MX? We want to do NATTING for traffic between 2 vlans on the LAN. this traffic will not traverse the internet or any public ip addresses. 

[alemabrahao]

Nope, just for Site-to-site VPN Translation.

https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

[hmc25000]

That sucks. One more thing that convinces me Meraki is geared more for smaller businesses.

[PhilipDAth]

I have not tested this exact case - but I think this is likely to work.

1:1 NAT definitely works for internal to internal traffic, so it should work for traffic between VLANs.

It is a quick test to find out ...

[hmc25000]

How would you do this for LAN links? You can only select an internet link here.

[alemabrahao]

It's not possible.

[PhilipDAth]

Sorry, I mis-understood.  I was thinking you meant NAT one private IP address to another - which I think should work - but reading it again I think you want to do subnet translation - which you can not do.

[hmc25000]

How would you do this for LAN links? You can only select an internet link here.