Is there a way to set Netflow Source interface?

[Jvanschepen]

I have multiple networks setup on my MX67.

Data - 10.1.7.254

Voice - 10.1.107.254

Guest Wifi - 10.250.7.254.

The data network can get to my netflow collector, but the Guest Wifi cannot.  When it hits the firewall, the netflow source interface is the Guest Wifi interface 10.250.7.254.  Is there a way to set the source interface for Netflow vlan the way I can in Cisco?

[Mloraditch]

There is not.

See here for how the source is selected: https://documentation.meraki.com/MX/Monitoring_and_Reporting/NetFlow_Overview#NetFlow_Export_Scope

[alemabrahao]

You cannot manually set the source interface for NetFlow traffic like you can on traditional Cisco devices.

[alemabrahao · Accepted solution]

The IP of the highest numbered VLAN is used for this communication.