Internet NAT on MX100

Solved
Mr-cook
Here to help

Internet NAT on MX100

Hi , all

 

This could be a stupid question , but I don't find on my MX100 how to configure internet NAT to permit users to go on internet (being natted by the MX public IP)

 

Is it done automatically ? is it done using port forwarding, 1/1 NAT , 1:many NAT ?

 

thank you

1 Accepted Solution
Nash
Kind of a big deal

Nah, you're fine. Meraki's different.

 

An MX (by default) will automatically pass all traffic it receives from the inside to the outside, as PAT/1:Many. 

 

You can restrict that via the L7 and L3 firewall, content filter...

View solution in original post

1 Reply 1
Nash
Kind of a big deal

Nah, you're fine. Meraki's different.

 

An MX (by default) will automatically pass all traffic it receives from the inside to the outside, as PAT/1:Many. 

 

You can restrict that via the L7 and L3 firewall, content filter...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels