Meraki

awadkhider · ‎Sep 18 2020

I have a problem accessing a device mx100 via managment port

DarrenOC · ‎Sep 19 2020

connect your PC to the MX management port via Ethernet cable. Set your PC to get an IP via DHCP then browse to the IP of the default gateway that you’re assigned.

You’ll be asked to enter a username and password. The username is the device serial number. No need to enter a password.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

DarrenOC · ‎Sep 19 2020

Hi @awadkhider , can you expand on the issue a bit?

Is this a brand new MX fresh out the box?

has it been operational for a while and you want to make a local change?

https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_M...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

awadkhider · ‎Sep 19 2020

Yes, I have turned it on for a while,on the dashbord ; but I have not made the required settings yet , and i have not done the local settings yet

DarrenOC · ‎Sep 19 2020

Hi @awadkhider

connect your PC to the MX management port via Ethernet cable. Set your PC to get an IP via DHCP then browse to the IP of the default gateway that you’re assigned.

You’ll be asked to enter a username and password. The username is the device serial number. No need to enter a password.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

DarrenOC · ‎Sep 19 2020

All ears @presley , do you want my bank account number and sort code?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

cmr · ‎Sep 20 2020

@DarrenOC I'm sure I have those somewhere, would you like me to share? 😇

If my answer solves your problem please click Accept as Solution so others can benefit from it.