cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to push Guest network traffic to flow and go out though specific public IP?

Comes here often

How to push Guest network traffic to flow and go out though specific public IP?

How to push Guest network traffic to flow and go out though specific public IP?

8 REPLIES 8
Highlighted
Here to help

Re: How to push Guest network traffic to flow and go out though specific public IP?

Hi,

 

I think you have 2 WAN Uplinks and want to push Guest flow to backup link.

You can go to SD WAN & traffic shaping --> Flow preferences --> source is Guest subnet, dest is any, preferred uplink is backup.

Comes here often

Re: How to push Guest network traffic to flow and go out though specific public IP?

Thanks naturan for your response but my question is to push to specific public IP not to WAN 2.

 

For example, I have 5 public IPs and I want the guest to go though one of them specifically. 

 

 

 

Kind of a big deal

Re: How to push Guest network traffic to flow and go out though specific public IP?

I think what you want to do is this. Hope it helps.

 

https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Configuring_1%3A1_NAT

Comes here often

Re: How to push Guest network traffic to flow and go out though specific public IP?

Thank you but unfortunately it's not recommended to use

 

''A basic but insecure 1:1 NAT configuration can be set up to forward all traffic to the internal client. This should be configured when a 1:1 NAT needs to be made on a quick notice, but is not recommended due to security reasons. When all ports are forwarded to a client, attackers using a port scanner can target vulnerable services or gain access to the internal server.''

 

 

Maybe looking for more secured solution 

Here to help

Re: How to push Guest network traffic to flow and go out though specific public IP?

he wants to push whole network traffic, so I think this solution will not help a lot.
Kind of a big deal

Re: How to push Guest network traffic to flow and go out though specific public IP?

What @natuan says is the only way you can do this I think. But then that WAN link has to have that dedicated IP of course.

Comes here often

Re: How to push Guest network traffic to flow and go out though specific public IP?

Thank you everyone

Here to help

Re: How to push Guest network traffic to flow and go out though specific public IP?

only have 1 Public IP for our small sites so I have no idea but you can open a case and Meraki can help you

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.