Future configuration : NAT question, Several uplinks for several vlans

SOLVED
FrederiqueC
Here to help

Future configuration : NAT question, Several uplinks for several vlans

Hello,

 

I have a configuration question prior to implementation : I have several IPs (let's say 1.1.1.52/29) and I would like to map several uplinks on each of the available IPs and be able to do port forwarding to internal hosts (which are in different vlans).

I also need that each individual vlan to be mapped to different public IP

Example
Port forwarding
1.1.1.52:3389 -> vlan 1:host1
1.1.1.53:3389 -> Vlan 2:host 1
1.1.1.54:3389 -> vlan 3:host 1
Translation to public IPs :

Vlan 1 -> 1.1.1.52
Vlan2 -> 1.1.1.53
Vlan 3 -> 1.1.1.54

 

Is there a way to set this up on the Meraki ? I am used to IOS Cisco Routers and never used wan on same subnet.

Thank you.

F.

1 ACCEPTED SOLUTION
cmr
Kind of a big deal
Kind of a big deal

@FrederiqueC unfortunately MX isn't ideal for what you want as it does not support a subnet or VLAN mapping to a particular external IP.  The inbound should work fine though.

View solution in original post

2 REPLIES 2
cmr
Kind of a big deal
Kind of a big deal

@FrederiqueC unfortunately MX isn't ideal for what you want as it does not support a subnet or VLAN mapping to a particular external IP.  The inbound should work fine though.

 

I was hoping that Merakis were able to route by source IP...

Thank you though @cmr 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels