Firewall info - open ports for Meraki dashboard

Proxy
Here to help

Firewall info - open ports for Meraki dashboard

Hi all,

So today I noticed that the destination addresses listed under firewall info for my dashboard had changed, and this explains nicely why some devices have been having a hard time connecting to the dashboard.

My question is - for MX devices, what source address would they use management connections on TCP/7734, 7752 and UDP/7351, 9350-9351?  I can packet capture and see this traffic on the WAN interface, but not always the LAN interface (espcially the UDP traffic).  This might just be a coincidence because I am capturing at different times, or does the MX originate the UDP traffic from the WAN address (i.e. not one of the LAN subnets)?

Thanks in advance.

1 Reply 1
ww
Kind of a big deal
Kind of a big deal

Yes from wan interface/ip.

 

If you see traffic on the mx lan to meraki subnet/ports its most Likely  a AP or Switch management ip.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels