Firewall info What are the IP addresses behind api.meraki.com?

[VincentVIGS]

Hi everybody,

I am preparing to install an MX68 that will be located behind a firewall before accessing the internet. And I need to know the IP addresses to which the FQDN api.meraki.com redirects. This is in order to correctly configure the port opening on the firewall.

Thanking you in advance

[ww]

The api doesnt configure the mx itself. It configures  the meraki dashboard (cloud) config. That will be pushed to the mx using the meraki management tunnel

Or are you accessing/configuring the meraki dashboard api from behind that same mx?

[VincentVIGS]

Hi ww,

I don't access or configure the meraki dashboard api from behind that same mx. So I don't need to configure this on the firewall, that's it ?

I have an other question, maybe you can answer me.

Can I configure the MX with a NTP server different from the MERAKI one ?

Thanks

[alemabrahao]

No, it's not possible, you just can configure the time zone.

[PhilipDAth]

I think what you are actually asking is - what firewall rules are require to allow the MX68 to work.

Go to the ? in the top right hand corner, and then down to "Firewall info".

[VincentVIGS]

Hi PhilipDath,

Thanks for your reply but I'm already aware of that. And I'm already basing these informations for the firewall configuration. But it's about a special private connection that requires the use of a dedicated NTP.