Documentation for Meraki mesh VPN with ospf

SOLVED
Slider
Getting noticed

Documentation for Meraki mesh VPN with ospf

Need a document to setup Meraki mesh VPN with ospf on the main mx84 and two remote mx64's in homes.

HM
1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

What do you need OSPF to do?  Meraki kit itself does not need it, as the routes to remove VPN sites are learnt via the cloud.  You only need it [usually] when interfacing to something non-Meraki.

 

This guide says how to use OSPF to allow an MX to advertise remote VPN subnets.

https://documentation.meraki.com/MX-Z/Site-to-site_VPN/Using_OSPF_to_Advertise_Remote_VPN_Subnets

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

What do you need OSPF to do?  Meraki kit itself does not need it, as the routes to remove VPN sites are learnt via the cloud.  You only need it [usually] when interfacing to something non-Meraki.

 

This guide says how to use OSPF to allow an MX to advertise remote VPN subnets.

https://documentation.meraki.com/MX-Z/Site-to-site_VPN/Using_OSPF_to_Advertise_Remote_VPN_Subnets

Thanks, this document will help. 

HM
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels