DNS Result after connect Secure Client

[simpson]

Hi,

I have some problems about DNS result name, during I'm work at office with AD DNA-A they can result name correctly with private ip e.g. 192.168.1.100 at office.

Once I connect from outside via Secure Client, I also get IP and DNS-A  <-- same DNS that using inside office. But during resolved same name, They return Public IP that register at DNS server e.g. 203.155.111.20 

I would like to get resolved this name to same name at office provide 192.168.1.100   <-- do you have any idea how to check ?

Note : I'm not really good for DNS and Meraki firewall. Please kindly advise.

[alemabrahao]

Since you have the service published on the internet and the clients are accessing it via the DNS that is configured on their internet router.

The only way I can see is if you "force" the machine to use its internal DNS instead of the DNS that is configured on their router, or if you do not publish the service via the internet if that is a possibility.

[PhilipDAth]

Have you configured the MX to give out the internal DNS server IP address to Secure Client users?