DC-DC Failover Site-to-Site VPN hib and spoke with Auto VPN

[Dilkush123]

[Dilkush123]

I trying to find a better design, I have this configured according to the documentation  and I tried failover and it didin't work..

All the time from the spoke standpoint the secondary DC hub is down , even the primary is down ..

Our DC -DC inter-connection through MPLS  and I have the same subnet advertised from both MPLS side for the spokes..

Any help would greatly appreciated 

[PhilipDAth]

So each branch has an MPLS circuit and an Internet circuit?

Are you using AutoVPN over MPLS or using a tracked route over MPLS?

[Dilkush123]

Thanks Philip for the reply.. 

Nope the Branch is connected using the  S2S VPN to the hubs over Internet. And the Hub sites are interconnected using MPLS..

I am using the AutoVPN b/w the hub/spokes..

[PhilipDAth]

At the DC's, how are you communicating the Meraki AutoVPN routes to the network core?  BGP?  OSPF?

Also the 14.x code has a lot of improvements in this area.