Connecting to VPN from Windows 11

bghayad
New here

Connecting to VPN from Windows 11

Hello;

I am facing a problem to connect from Windows 11 because windows 11 does not have the ability to check Unencrypted password (PAP). How to overcome this problem? I can not downgrade to Windows 10.

Is there a client VPN that I can download to be used to connect to Meraki VPN router?

 

Regards

Bilal Ghayad

7 Replies 7
alemabrahao
Kind of a big deal
Kind of a big deal

Have you tried to enable PAP and CHAP at the same time?

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
alemabrahao
Kind of a big deal
Kind of a big deal

What is your MX model and Firmware version, you can use Anyconnect.

 

https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
PhilipDAth
Kind of a big deal
Kind of a big deal

Try using my client VPN wizard, create a PowerShell script, and see if it works that way.

https://www.ifm.net.nz/cookbooks/meraki-client-vpn.html 

Brash
Kind of a big deal
Kind of a big deal

This is a really neat tool!

MJH
Conversationalist

Does not working on windows 11. Any solution?

alemabrahao
Kind of a big deal
Kind of a big deal

@MJH  you can try with this client: https://www.draytek.com/products/smart-vpn-client/

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
AlexanderE
Conversationalist

I ran into this one as well and will share my findings.
If you run: C:\Windows\System32\rasphone.exe

 

And then select properties / security, you will see a checkbox for PAP

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels