Connecting a MG21E to MX68

Solved
rsage_voda
Getting noticed

Connecting a MG21E to MX68

Is it permissible to connect an MG21 via one LAN port to the WAN 2 port on an MX68 and then connect the LAN port on the MG21 to one of the PoE ports 11 or 12 on the same MX68

rsage_voda_0-1711559208159.png

 

1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

Yes, that works fine. I have it documented in this deck.

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

2 Replies 2
Ryan_Miles
Meraki Employee
Meraki Employee

Yes, that works fine. I have it documented in this deck.

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
PhilipDAth
Kind of a big deal
Kind of a big deal

Going sideways, you can see other ways of powering it at the bottom of this page:
https://meraki.cisco.com/product/cellular/external-antenna/mg21e/

 

PhilipDAth_0-1711615126506.png

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels