Configuration Sync

[RSquared719]

Within the Configuration Sync applet, I only see about 20% of my sites. We have a mixture or MX65 and MX68CW (majority of sites) for remote locations. Why don't I see them all as I would like to make sure that the Content Filtering is setup the same for each site.

[jimmyt234 · Accepted solution]

Are they all standalone appliance networks? Configuration sync does not work for the combined network type (eg. you have switches / APs / other Meraki devices in the same network).

[RSquared719]

The sites I'm seeing are stand-alone networks. Makes sense as most of the sites are combined networks. Thank you!