Conditional NAT

Solved
Flexl75
Conversationalist

Conditional NAT

Is it possible to do this type of l NAT on a Meraki MX , like an ASA ?  e.g. 

 

nat (inside,outside) source static PC NAT_PC  destination static RemotePC-VPN RemotePC-VPN

Derek Fleischer
1 Accepted Solution
Flexl75
Conversationalist

Looks like it (Meraki MX to Meraki MX) can be enable via Meraki Support

 

https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

 

Thanks everyone for your responses

Derek Fleischer

View solution in original post

5 Replies 5
PhilipDAth
Kind of a big deal
Kind of a big deal

You want an IP address NATed but only for client VPN users?

 

I don't think so.

CptnCrnch
Kind of a big deal
Kind of a big deal

Repeat after me: MX is not ASA / Firepower. MX is not ASA / Firepower. MX is not ASA / Firepower

 

🙂

KarstenI
Kind of a big deal
Kind of a big deal


@CptnCrnch wrote:

Repeat after me: MX is not ASA / Firepower. MX is not ASA / Firepower. MX is not ASA / Firepower

 

🙂


Amen! 😉

Flexl75
Conversationalist

Looks like it (Meraki MX to Meraki MX) can be enable via Meraki Support

 

https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

 

Thanks everyone for your responses

Derek Fleischer
KarstenI
Kind of a big deal
Kind of a big deal

But be aware that this feature will not provide the functionality you were asking for. It's only for Auto-VPN and will translate a whole local subnet. Well, the last point could perhaps be solved with a static host-route on the MX.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels