Clients view finally showing correct connected port for devices plugged into MXs

Solved
cmr
Kind of a big deal
Kind of a big deal

Clients view finally showing correct connected port for devices plugged into MXs

On the new clients view, I am now seeing the correct port for each device that I have directly plugged into an MX, whereas before you would see the nearest switch port 😎

 

cmr_0-1731021932911.png

The client identifier is also good.  Remaining issues is the 'Other' spoof client that was actually a wireless client connected to the AP in port 13 and the devices in port 5 that is actually the port connected to the Cisco 9300L at the top of the list.  As it is not always powered on, I can forgive that blemish 🙂 

 

Hopefully, now that the logic looks good, we might now see the return of the Ports page for the MXs 🤞 

1 Accepted Solution
RaphaelL
Kind of a big deal
Kind of a big deal

For me it has been like that since the new page : 

 

RaphaelL_0-1731068968782.png

 

 

We are running 18.107.6 at the moment on this network.

View solution in original post

8 Replies 8
Brash
Kind of a big deal
Kind of a big deal

That's awesome. Did this come with a firmware change or just a backend dashboard update?

I do wonder whether the change is correlated to my VPN concentrator concentrator no longer showing any usage graph today  😆

 

Brash_1-1731023696133.png

 

RWelch
A model citizen

👏👏👏Progress!

RWelch
A model citizen

What MX firmware are you running (just curious).

cmr
Kind of a big deal
Kind of a big deal

19.1.5...

RaphaelL
Kind of a big deal
Kind of a big deal

It has been like that for a little while with the new page however you still can't get that info via API :'(

cmr
Kind of a big deal
Kind of a big deal

I think it is since 19.1.4 for me, would that make sense for you @RaphaelL?

cmr
Kind of a big deal
Kind of a big deal

However I think 19.1.4 had the information, but the port numbers were not quite right, or am I imagining that!?

RaphaelL
Kind of a big deal
Kind of a big deal

For me it has been like that since the new page : 

 

RaphaelL_0-1731068968782.png

 

 

We are running 18.107.6 at the moment on this network.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels