Clients view finally showing correct connected port for devices plugged into MXs

[cmr]

On the new clients view, I am now seeing the correct port for each device that I have directly plugged into an MX, whereas before you would see the nearest switch port 😎

The client identifier is also good.  Remaining issues is the 'Other' spoof client that was actually a wireless client connected to the AP in port 13 and the devices in port 5 that is actually the port connected to the Cisco 9300L at the top of the list.  As it is not always powered on, I can forgive that blemish 🙂 

Hopefully, now that the logic looks good, we might now see the return of the Ports page for the MXs 🤞 

[Brash]

That's awesome. Did this come with a firmware change or just a backend dashboard update?

I do wonder whether the change is correlated to my VPN concentrator concentrator no longer showing any usage graph today  😆

[RWelch]

👏👏👏Progress!

[RWelch]

What MX firmware are you running (just curious).

[cmr]

19.1.5...

[RaphaelL]

It has been like that for a little while with the new page however you still can't get that info via API :'(

[cmr]

I think it is since 19.1.4 for me, would that make sense for you @RaphaelL?

[cmr]

However I think 19.1.4 had the information, but the port numbers were not quite right, or am I imagining that!?

[RaphaelL · Accepted solution]

For me it has been like that since the new page : 

We are running 18.107.6 at the moment on this network.