Client VPN on Z3C

[mrjelly]

Hello,

I would like to setup an Anyconnect client VPN service and have a Z3C and an MX95.

Is it possible to setup a client VPN service using the Z3C and are there any limits on the options when compared to the MX95?

Thanks

[alemabrahao]

You can enable it without any problem.

You can test it before put it in production.

[mrjelly]

I don't fully follow, sorry. Are there any differences in the capability of the Z3C and the MX95 when using it for a client VPN service?

Thank you

[alemabrahao · Accepted solution]

The imitation is actually the issue of the number of clients ,supported on the Z3 compared to the MX.
The Z3 is recommended for a maximum of 5 devices, including the VPN client.