Client VPN Issue

SOLVED
Eyad2411
Here to help

Client VPN Issue

I Have an issue over the MXs in different organizations where I'm unable to connect to the Client VPN.

the Massage showing in my Computer is " The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer"

 

where in the Event Log it is showing the following Massage 

Non-Meraki / Client VPN negotiation     msg: FIPS mode disabled

 

Please Note that pre-shared Key along with the Username and Password is 100% same as configured over the MX

1 ACCEPTED SOLUTION
Inderdeep
Kind of a big deal
Kind of a big deal

@Eyad2411 : Check this out 

https://documentation.meraki.com/MX/Client_VPN/Troubleshooting_Client_VPN#Windows_Error_789

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

View solution in original post

2 REPLIES 2
Inderdeep
Kind of a big deal
Kind of a big deal

@Eyad2411 : Check this out 

https://documentation.meraki.com/MX/Client_VPN/Troubleshooting_Client_VPN#Windows_Error_789

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

Hey thanks man! This section was the fix for me:

Lothar_0-1644006864780.png

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels