Hello Good Folks,
Anyone able to clear DHCP leases with any workarounds? Already tried the below (independently), allowing the config to update after saving:
None worked for me. Anyone have add'l ideas besides rebooting.
#dhcp #clear_dhcp
Solved! Go to solution.
Hey @252_Masked_Nett
If you are referring to the Z3 itself ,a factory reset will clear leases off of the device. Otherwise, you can edit the DHCP scope from a /24 to a /23 for example, just ensure that the config changes were pushed to the device and the Z3 is up to date before changing it back, typically waiting 5 minutes between changes should suffice.
Hey @252_Masked_Nett
If you are referring to the Z3 itself ,a factory reset will clear leases off of the device. Otherwise, you can edit the DHCP scope from a /24 to a /23 for example, just ensure that the config changes were pushed to the device and the Z3 is up to date before changing it back, typically waiting 5 minutes between changes should suffice.
Yes, I'm referring to the Z3C as the DHCP server.
Reboot the Z3
Alas that doesn't clear the DHCP leases. I wish it did.
The way I do it is to turn off DHCP for a little bit, and then turn it on again.