Changing Management IP addressing on the run

turipriv
Conversationalist

Changing Management IP addressing on the run

Greetings everyone,

 

I run multiple Meraki networks on several organization and until now I've always kept the management traffic on VLAN1 with standard Meraki addressing (i.e.: 192.168.128.0/24).

 

Now I may need to change the management IP classes on some network for monitoring purposes and I was wondering if doing this while the network is up and running may cause any disruption whatsoever.

 

Thanks in advance for any suggestions,

Salvatore.

1 Reply 1
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @turipriv , I would say that the device will lose connectivity to the cloud for a moment whilst it re-registers with the new IP.

 

Internally however your network will still keep running.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels