Changing MX from Spoke to Hub during production

Solved
Toby
Getting noticed

Changing MX from Spoke to Hub during production

Hello, I'm in the process of moving a customer site, and as such a temporary reconfiguration of a site from spoke to hub will be needed. This switchover will likely need to be don during production.

 

I've looked for potential effects on the the network when this is done but was unable to find anything. How big can i expect the impact to be for the network in question?

1 Accepted Solution
Nash
Kind of a big deal

If at all possible, I would recommend getting a maint window for this, even if it's only 30-45 minutes for some leeway. I would anticipate some level of network disruption for a short period of time.

View solution in original post

3 Replies 3
PhilipDAth
Kind of a big deal
Kind of a big deal

I don't know the answer for sure.

 

I expect reconvergence could take several minutes for all nodes to get to the final routing state.

Nash
Kind of a big deal

If at all possible, I would recommend getting a maint window for this, even if it's only 30-45 minutes for some leeway. I would anticipate some level of network disruption for a short period of time.

Toby
Getting noticed

Okay, I imagined as much. Thanks for the help.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels