cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Change WAN DNS entries on multiple MX units

Highlighted
New here

Change WAN DNS entries on multiple MX units

Is there a way to replace the DNS server entries on the local configuration page for multiple units?  I have 119 locations, and am not wanting to browse to each unit's configuration page to change DNS Server 1 and 2 entries 119 times.

4 REPLIES 4
Highlighted
Head in the Cloud

Re: Change WAN DNS entries on multiple MX units

You can do this on the dashboard in appliance status > uplink.  Maybe there is way with the API to do them all faster?

 

Screen Shot 2018-10-25 at 9.19.45 AM.png

Highlighted
Kind of a big deal

Re: Change WAN DNS entries on multiple MX units

HI @DavidSmith. There's no way to make this change en masse via either the Dashboard or the API. You're going to have to do it individually 😞

 

The only other suggestion I would have is call support and ask them if they can do it. I would imagine they'll push back, but it's worth a try so you don't have to do it. 

Highlighted
New here

Re: Change WAN DNS entries on multiple MX units

This is very helpful.  I have been logging in to each unit on it's own web page to change info.  A way to make a policy to change selected ones would be good, but I am unaware of one.

Highlighted
A model citizen

Re: Change WAN DNS entries on multiple MX units

If you wanted to do it in mass you could hire a some interns... 😉

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.