Cellular uplink concurrently with a wired uplink

SOLVED
Trininox
Here to help

Cellular uplink concurrently with a wired uplink

This was mentioned as a new feature in MX16.2

 

  • Added support for using a cellular uplink concurrently with a wired uplink, as opposed to the cellular uplink only being available for failover.

 

Anyone test this?  It's been a sadly missed feature to include integrated cellular (MX67C) in Active-Active AutoVPN and load balance rules.  I know the MG series have been released. I picked up MG41 for an MX250 but I also have a fleet of branches with MX67C.

1 ACCEPTED SOLUTION
Ryan_Miles
Meraki Employee
Meraki Employee

i've had a customer test it and it worked as advertised. note it's still in beta and needs to be enabled by support or a meraki se.

 

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

View solution in original post

2 REPLIES 2
Ryan_Miles
Meraki Employee
Meraki Employee

i've had a customer test it and it worked as advertised. note it's still in beta and needs to be enabled by support or a meraki se.

 

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

One caveat I discovered, this feature is only available when the MX67C is not bound to a template, otherwise, the option never appears to use the cellular actively.  That's somewhat disappointing as it eliminates the ease of managing changes to a good number of sites in my environment having to manage them independently. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels