Cellular uplink concurrently with a wired uplink

[Trininox]

This was mentioned as a new feature in MX16.2

• Added support for using a cellular uplink concurrently with a wired uplink, as opposed to the cellular uplink only being available for failover.

Anyone test this?  It's been a sadly missed feature to include integrated cellular (MX67C) in Active-Active AutoVPN and load balance rules.  I know the MG series have been released. I picked up MG41 for an MX250 but I also have a fleet of branches with MX67C.

[Ryan_Miles · Accepted solution]

i've had a customer test it and it worked as advertised. note it's still in beta and needs to be enabled by support or a meraki se.

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

[Trininox]

One caveat I discovered, this feature is only available when the MX67C is not bound to a template, otherwise, the option never appears to use the cellular actively.  That's somewhat disappointing as it eliminates the ease of managing changes to a good number of sites in my environment having to manage them independently.