Cant ping MX IP from the client!

SOLVED
nikmagashi
Getting noticed

Cant ping MX IP from the client!

Hi,

 

I have created a vlan on my meraki MX and I have set up the subnet, MX IP, and vlan ID! The deployment mode is routed. Under security > Firewall, I have allowed "any" for ICMP (ping). The port where the switch is connected (downstream MX port) has the native vlan (which is not the vlan I have created) and then under allowed vlan I have "ALL VLANs"!

 

Now the interesting part is that the server is still unable to ping the MX IP (defaul gateway for client)! Is there anything that I might missed on the configuration or maybe something else I should check?

 

Thnx

1 ACCEPTED SOLUTION
nikmagashi
Getting noticed

The problem was on the switch!

View solution in original post

1 REPLY 1
nikmagashi
Getting noticed

The problem was on the switch!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels